TECHNICAL INFORMATION
Cutting capacity at 90° |
Round 255 mm. Square 230 mm. Rectangular 300x180mm |
Cutting capacity at 45° right |
Round 210 mm. Square 190 mm. Rectangular 200x180mm |
Cutting capacity at 45° left |
Round 180 mm. Square 160 mm. Rectangular 180x100mm |
Cutting capacity at 60° left |
Round 135 mm. Square 110 mm. Rectangular 130x100mm |
Maximum capacity for full materials |
200mm |
Blade size. |
2765x27x0,9 |
End-cutting bandsaw inclination |
3° |
Blade motor |
1,5/1,8 kw |
Blade speed |
35/70 15÷110 m/min |
Hydraulic unit motor power |
kw 0,37 |
Hydraulic united tank |
Lt 12 |
Coolant tank |
Lt 20 |
Size |
1230x1700x1750 mm |
Working table height |
940 mm |
Weight |
412kg |
Features
Wide working area
BS 300 PLUS is equipped with a wide diameter working area and a system of automatic easy stops at 0°, 45° and 60° left and 45° right with graduated plate to identify and set different angles.
Opening vice
The vice has adjustable guides, free to move alongside the worktable, with rapid approaching and camping.
Rigid sawframe
Machine sawframe is rigid cast-iron with tubolar section, 320 mm pulleys, high blade tension at 1700 kg/cm2 and to avoid an excessive strain on the blade with frontal regulation and microswitch conroller.
Blade protection
A carter protect che blade, allowing to have easy access for maintentance when needed; a system with blade guides with hard pads, additional lateral bearings provides for the perfect allignment of the blade
Blade protection
A carter protect che blade, allowing to have easy access for maintentance when needed; a system with blade guides with hard pads, additional lateral bearings provides for the perfect allignment of the blade
Electromic inverter (Optional)
If required, the electronic inverter for variable blade speed allows the operator via keyboard to adjust the machine to be able to cut a wide range of materials and different sections. The change of speed is via inverter and it does not affect the power of the engine even at low speeds.
Optionals
Minimal lubrification system (Optional)
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.
Adapter to synchonize RTP/RTD (Optional)
Adapter to synchronize the RTP/RTD table with sawframe motion
Laser ray (Optional)
Pressure reducer (Optional)
Pressure reducer for hydraulic vice (only for SHI version)
Hydraulic device for bundle cutting (Optional)
Only for SHI version, hydraulic device for bundle cutting (Max 230x100mm
Min 100x50mm).
Foot pedal (Optional)
Foot pedal with 3 3m long cable (only for SHI version).
Roller tables
Connection element for unloading table (Optional)
Connection element for unloading table equipped with 1 roller ans a slide to collect coolant.
Loading/unloading table – first element (Optional)
Loading/unloading roller table, first element, 2 m long, maximum capacity 700kg
Loading/unloading table – first element (Optional)
Loading/unloading roller table, first element, 2 m long, maximum capacity 700kg
Unloading roller table with metric rod (Optional)
Unloading roller table with metric rod and length stop, 1st element, 2m long, maximum capacity 700kg
Unloading roller table with metric rod (Optional)
Unloading roller table with metric rod and length stop, following elemnt, 2m long, maximum capacity 600kg.
Unloading table with digital reading Optional)
RTD2LW30
unloading table with digital reading and manual posioning, mesurement length 2m, capacity 700kg RTD4LW30
unloading table with digital reading and manual posioning, mesurement length 4m, capacity 1300kg RTD6LW30
unloading table with digital reading and manual posioning, mesurement length 6m, capacity 1900lg
Unloading table with motorized length stop (Optional)
RTP3W30
Unloading table with motorizedn length stop and selection of the lengths via keayboad, 3m, 1300kg. RTP6W30
Unloading table with motorizedn length stop and selection of the lengths via keayboad, 6m, 1900kg.
Pair of vertical roller (Optional)
Pair of vertical rollers 300 mm made in steel, max 2 pairs for each element 2m long. To use without rollers covers.